Ponds used for raising freshwater high density fish farming should have some basic features. A good supply of freshwater is important, and the soil must have excellent water-retention qualities. Soft or hard water of acceptable quality is the preferred water source for raising freshwater high density fish farming. Yet, in spite of these features many a times grow out fish ponds fails to deliver quality yield. One of the biggest reasons behind this is the lack of proper aeration. In order to ensure high yields from these grow out ponds AirOxi brings to you various plug and play submersible aerators that will help you improve your yield in different grow out fish ponds.

What is Plug and Play Submersible Aerator?

This stand-alone aeration system is providing reliable, convenient and affordable oxygen transfer. The plug-and-play installation provides convenience of lift-in, lift-out aeration system. The plug-and-play aerator offers a cost-effective alternative to fixed aeration systems. The aerator can be installed quickly without emptying the existing tank.

Features of Plug and Play Submersible Aerators

Some of the major features of Plug and Play Submersible Aerators are reflected below:

• A perfect blend of mechanical and diffused aeration system
• High flow rate of air + water
• A highly efficient alternative to surface aerators and paddlewheel aerators
• Approximate biomass supported per HP - 500 Kg of Shrimp and 2000 Kg of Fish
• Approximate oxygen dissolved is 1.2 Kg per HP of power per hour

Along the lines of these major features AirOxi brings to its customers three different variant of plug and play submersible aerators: AirOxi Octopus, AirOxi Squid and AirOxi Scorpion.

The highlight reel for each of the product is showcased below:

AirOxi Octopus

The Octopus submersible aerator from AirOxi is a specially designed aerator that submerges in water and provides the necessary aeration in the best possible manner. It has a total of eight legs and it resembles an octopus. The entire system is based on a stainless steel pod where the diffusers are installed on the bottom of eight legs on the unit. The presence of eight legs has given the name of the product. As a submersible aerator, the entire setup is submerged in water and the length of each of the legs can be customized as per the specific requirements of different fish farmers. Some of the major features of AirOxi octopus are reflected below.

Major Features of AirOxi Octopus

• Ventura system based design
• Direction of outlets can be changed to provide water movement in two opposite directions
• Fabrication of SS 304 and PVC
• Options of 1 with 4 nozzles and 2 HP with 8 nozzles. The nozzles can be rotated to give flow in any one direction or in two opposite directions.
• Option of 3 Phase (440 Volt) or single phase (220 Volt) motor, 50 Hz

For more detaials read our blog: https://www.airoxitube.com/air-oxi-octopus-submersible-aerator/

 AirOxi Squid

AirOxi squid is a submersible propeller type aerator available in 1 HP and 2 HP models. This aerator provides a combination of diffused aeration with directional flow. Depth of the air flow is about 2.5 feet and oxygen generated is 1.3 to 1.4 Kg / HP. Some of the major features of AirOxi squid are reflected below.

Major Features of AirOxi Squid

• Mixture of air and water, broken into smaller bubbles with propeller
• Provides water movement in any one direction
• Ready to use SS 304 and PVC body
• Available in 1 HP and 2 HP Models
• Air + water flow discharged at depth of 2.5 to 3 feet
• Option of 3 Phase (440 Volt) or single phase (220 Volt) motor, 50 Hz

AirOxi Scorpion

AirOxi Scorpion Aerator is a powerful jet aerator, available in 3 HP and 5 HP models, where the motor remains inside the water and it sucks in air from the surface. The resulting vacuum pushes in the air and water mixture out at a depth of half a meter, thus providing additional aeration. Some of the major features of AirOxi scorpion are reflected below.

For more information visit our blog: https://www.airoxitube.com/scorpion-aerator-the-ideal-plug-and-play-subsurface-aerator/

Major Features of AirOxi Scorpion

• Provides mixing and blending of water + air on all sides
• Ideal for grow out ponds of fish and shrimp culture
• Discharge outlets at 2.5 to 3 feet depth
• Available in 2 models - 5 HP with 6 arms (as shown in picture) and 3 HP with 4 arms
• Ready to use SS 304 and PVC body
• 3 Phase motor, 440 Volts, 50 Hz

In order to improve your yields from grow out ponds you can select from one of these plug and play submersible aerators brought you by AirOxi Tube. That will not only help you improve your yield in your grow out fish ponds but also help you improve your efficiency and productivity. For more information call: +91 - 7285017087